Add to Favorites

Clear Epoxy Resin for Arts and Crafts

  • Description
Product Detail

    Epoxy Resin 318AB
    Epoxy resin 318AB can be cured under normal temperature and high temperature, with the feature of good flowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface.

    318AB can be widely used for drops of glue, signs, cards, crafts, lighting, photo frame, lamp potting and mold filling, etc..

    Properties before Hardening







    Specific gravity



    Viscosity (25?)


    50 MAXCPS

    Mixing ratio

     A: B = 100:33(weight ratio)

    Hardening conditions

    25 ?×12H to 14H or 55?×1.5H (2 g)

    Usable  time

    25?×40min (100g)

    1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
    2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ?, please heat A glue to 30 ? first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
    3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest to use the heat curing.

    Properties after Hardening

    Hardness, shore D


    Withstand voltage, KV/mm


    Flexural strength, Kg/mm2


    Volume resistivity, Ohm3


    Surface resistance, Ohmm2


    Thermal conductivity, W/M.K


    Induced electric loss, 1KHZ


    Withstand high temperature, ?


    Moisture absorption,  %


    Compressive strength, Kg/ mm2


    1, The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
    2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
    3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
    4, Keep away from children.
    5, Please take a trial before application to avoid usage mistake.
    Storage And Shelf Life
    1, Store at the temperature of 25°C or cool and dry place. Avoid from sunlight, high temperature or high humidity environment.
    2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

    Notice: The above data is typical data measured by the laboratory environment under the temperature of 25 ?, and humidity of 70%. For customers reference only.

    Should you're interested in our clear epoxy resin for arts and crafts, welcome to buy or wholesale directly from our factory. We are one of the leading such manufacturers and suppliers in China, and we won't let you down.

Send your message to this supplier

Shenzhen Jinhua Electronic Materials Co.,Ltd

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any


Not exactly what you want? One request, multiple quotations Get Quotations Now >>